Air Rhino Air Scrubbers
HEPA Air Scrubber
HEPA Upright
HEPA Upright
(Small Footprint)
Carbon Air Scrubber
Carbon Air Scrubber Upright
Carbon Air Scrubber Upright
(Small Footprint)
|
Air Rhino Variable Speed Air Scrubbers
 |
The Air Rhino air scrubber from Electrocorp delivers up to 1,000 cubic feet of clean air per minute.
The Air Rhino may be ordered in three configurations.
HEPA for particle control.
100 lbs of carbon for airborne chemical and odor control. Special carbon blends are available to target speccific chemicals.
MERV 13 Bag configuration to capture coarse particles that may clog a HEPA filter ex. Drywall or Concrete Dust, Fibre Glass Particles.
The Air Rhino can be used to create a negative pressure zone.
It comes with a 12 inch flange for hose attachement. A second 12 inch flange can be added when you order. This second flange
allows a hose to be attached to draw in air to create a positive pressure zone.
The variable speed motor allows air flow and
noise to be finely controlled. Air Rhinos are easy to manoeuver with 4 handles and 4 industrial, ball-bearing wheels.
A germicidal Ultraviolet Lamp can be added when you order to sterilize the air of bacteria and other pathogens. A pressure guage
indicates when filter change is required.
The Air Rhino is also available in two vertical configurations with smaller footprint.
Recommended for:
- Fire or flood restoration
- Renovation, indoor construction
- Mold or asbestos abatement
- Airborn chemical, gas and odor control
- Maximum coverage area 1,500 square feet with 9 foot ceiling.
Electrocorp provides a 1 year warranty. Please Note: This is a commercial unit and is not returnable. |
 |
For Inquiries or Quotes Call 800-868-0964
|
|
Air Rhinos for Particle Control
| Air Scrubber |
Configuration |
Description |
|
|
Dimensions: 26 " x 26" x 37 " (H x W x D)
Shipping Weight: 200 lbs. with pallet
Operating Weight: 165 lbs.
# of units per pallet: 1
Filtration System: 24" x 24" x 11.5" medical-grade HEPA filter, 1 "pre-filter, 1" dust filter
Carbon: N/A
Carbon w/canister: N/A
HEPA:24" x 24" x 11.5" medical-grade HEPA filter
Electrostatic: N/A
CFM: 1000 Deliverd
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: (115/220) 8.9 / 4.5
Cord length: 8 ft.
Decibel Level: 55-75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Portable on industrial 3" wheels for easy placement and set up
Pressure Gauge /Light Indicator: Yes
Filter Access: Side latch
Options: Custom carbon blend, 12" inlet flange, 20W UV bulb, bag filter available (must purchase cage)
Colors:Galvanized steel
Motor Details: Centrifugal blower
|
|
The Air Rhino HEPA Air Scrubber by Electrocorp Delivers up to 1,000 Cubic Feet (CFM) of clean air per minute.
The Air Rhino delivers enough filtration power to change the air in a 1,500 sq. ft. room with 8.5' ceiling 4.7 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
A hose can be attached to the 12" flange on the air outlet. This allows the creation of a negative air pressure zone to control the spread of dust.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The carrying handles and wheels allow moving the Air Rhino.
A pressure light indicator shows when the HEPA filter needs changing.
|
|
|
Dimensions: 40" x 26" x 26" (H x W x D)
Shipping Weight: 200 lbs. with pallet
Operating Weight: 165 lbs.
# of units per pallet: 1
Filtration System: 24" x 24" x 11.5" medical-grade HEPA filter, 1 "pre-filter, 1" dust filter
Carbon w/canister:N/A
HEPA: 24" x 24" x 11.5" medical-grade HEPA filter
Electrostatic: N/A
CFM: 1000 Deliverd
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: (115/220) 8.9 / 4.5
Cord length: 8 ft.
Decibel Level: 55-75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Portable on industrial 3" wheels for easy placement and set up
Pressure Gauge /Light Indicator: Yes
Filter Access: Side latch
Options: 12" inlet flange, 10W or 20W UV bulb
Colors:Galvanized steel
Motor Details: Centrifugal blower
|
|
This upright configuration has a smaller 26' x 26' foot print
The Air Rhino HEPA Air Scrubber by Electrocorp Delivers up to 1,000 Cubic Feet (CFM) of clean air per minute.
The Air Rhino delivers enough filtration power to change the air in a 1,500 sq. ft. room with 8.5' ceiling 4.7 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
A hose can be attached to the 12" flange on the air outlet. This allows the creation of a negative air pressure zone to control the spread of dust.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The carrying handles and wheels allow moving the Air Rhino.
A pressure light indicator shows when the HEPA filter needs changing.
|
|
|
Dimensions: 40" x 21" x 26" (H x W x D)
Shipping Weight: 160 lbs. with pallet
Operating Weight: 125 lbs.
# of units per pallet: 1
Filtration System: 18" x 24" x 11.5" medical-grade HEPA filter, 1 "pre-filter, 1" dust filter
Carbon w/canister: N/A
HEPA: N/A
Electrostatic: N/A
CFM: 1000 Deliverd
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: (115/220) 8.9 / 4.5
Cord length: 8 ft.
Decibel Level: 55-75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Portable on industrial 3" wheels for easy placement and set up
Pressure Gauge /Light Indicator: Yes
Filter Access: Side latch
Options: 12" negative air flange, 20W UV bulb
Colors:Galvanized steel
Motor Details: Centrifugal blower
|
|
This upright configuration has a smaller 21' x 26' foot print
The Air Rhino HEPA Air Scrubber by Electrocorp Delivers up to 1,000 Cubic Feet (CFM) of clean air per minute.
The Air Rhino delivers enough filtration power to change the air in a 1,500 sq. ft. room with 8.5' ceiling 4.7 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
A hose can be attached to the 12" flange on the air outlet. This allows the creation of a negative air pressure zone to control the spread of dust.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The carrying handles and wheels allow moving the Air Rhino.
A pressure light indicator shows when the HEPA filter needs changing.
|
Air Rhinos for Airborne Chemical Control
| Air Scrubber |
Configuration |
Description |
|
|
Dimensions: 26 " x 26" x 37 " (H x W x D)
Shipping Weight: 285 lbs. with pallet
Operating Weight: 250 lbs.
# of units per pallet: 1
Filtration System: 100 lb. industrial carbon filter, 1" pre-filter, 1" dust filter
Carbon w/canister: 100 lbs.
HEPA:N/A
Electrostatic: N/A
CFM: 1000 Deliverd
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: (115/220) 8.9 / 4.5
Cord length: 8 ft.
Decibel Level: 55-75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Portable on industrial 3" wheels for easy placement and set up
Pressure Gauge /Light Indicator: Yes
Filter Access: Side latch
Options: Custom carbon blend, 12" inlet flange, 20W UV bulb
Colors:Galvanized steel
Motor Details: Centrifugal blower
|
|
The Air Rhino Carbon Air Scrubber by Electrocorp Delivers up to 1,000 Cubic Feet (CFM) of clean air per minute.
The Air Rhino delivers enough filtration power to change the air in a 1,500 sq. ft. room with 8.5' ceiling 4.7 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
A hose can be attached to the 12" flange on the air outlet. This allows the creation of a negative air pressure zone to control the spread of dust.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The carrying handles and wheels allow moving the Air Rhino.
A pressure light indicator shows when the HEPA filter needs changing.
|
|
|
Dimensions: 40" x 26" x 26" (H x W x D)
Shipping Weight: 285 lbs. with pallet
Operating Weight: 250 lbs.
# of units per pallet: 1
Filtration System: 100 lb. industrial carbon filter, 1" pre-filter, 1" dust filter
Carbon w/canister: 100 lbs.
HEPA: N/A
Electrostatic: N/A
CFM: 1000 Deliverd
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: (115/220) 8.9 / 4.5
Cord length: 8 ft.
Decibel Level: 55-75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Portable on industrial 3" wheels for easy placement and set up
Pressure Gauge /Light Indicator: Yes
Filter Access: Side latch
Options: Custom carbon blend, 12" negative air flange, 20W UV bulb
Colors:Galvanized steel
Motor Details: Centrifugal blower
|
|
This upright configuration has a smaller 26' x 26' foot print
The Air Rhino Carbon Air Scrubber by Electrocorp Delivers up to 1,000 Cubic Feet (CFM) of clean air per minute.
The Air Rhino delivers enough filtration power to change the air in a 1,500 sq. ft. room with 8.5' ceiling 4.7 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
A hose can be attached to the 12" flange on the air outlet. This allows the creation of a negative air pressure zone to control the spread of dust.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The carrying handles and wheels allow moving the Air Rhino.
A pressure light indicator shows when the HEPA filter needs changing.
|
|
|
Dimensions: 40" x 21" x 26" (H x W x D)
Shipping Weight: 215 lbs. with pallet
Operating Weight: 180 lbs.
# of units per pallet: 1
Filtration System: 80 lb. industrial carbon filter, 1" pre-filter, 1" dust filter
Carbon w/canister: 80 lbs.
HEPA: N/A
Electrostatic: N/A
CFM: 1000 Deliverd
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: (115/220) 8.9 / 4.5
Cord length: 8 ft.
Decibel Level: 55-75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Portable on industrial 3" wheels for easy placement and set up
Pressure Gauge /Light Indicator: Yes
Filter Access: Side latch
Options: Custom carbon blend, 12" negative air flange, 20W UV bulb
Colors:Galvanized steel
Motor Details: Centrifugal blower
|
|
This upright configuration has a smaller 21' x 26' foot print
The Air Rhino Carbon Air Scrubber by Electrocorp Delivers up to 1,000 Cubic Feet (CFM) of clean air per minute.
The Air Rhino delivers enough filtration power to change the air in a 1,500 sq. ft. room with 8.5' ceiling 4.7 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
A hose can be attached to the 12" flange on the air outlet. This allows the creation of a negative air pressure zone to control the spread of dust.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The carrying handles and wheels allow moving the Air Rhino.
A pressure light indicator shows when the HEPA filter needs changing.
|
|
|
|
