|
Technical Characteristics
Dimensions: 18.5" (h) x 25"(w) X 15"(d)
Shipping Weight: 80 LBS.
Operating Weight: 65 lbs.
# of units per pallet: 1
Filtration System: 24 lbs. of carbon, medical-grade HEPA filter, pre-filter
Carbon w/canister: 24 lbs 2.5" Depth
HEPA: Medical-grade HEPA filter
CFM: 450 Delivered
Speed: Variable
|
Voltage: 115/60Hz or 230/60Hz Please specify when ordering
Amps: 1.76 / .88
Cord length: 8 ft.
Decibel Level: 55 - 75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Moveable, on 2" industrial casters
Pressure Gauge /Light Indicator: Yes
Filter Access: Rear latch
Options: N/A
Colors: Black with yellow and black safety stripe
Motor Details: Motorized impeller in a housing
|
|
The Air Marshal 2000 delivers up to 450 CFM (Cubic Feet per Minute).
The Air Marshal 2000 contains a 2 inch deep HEPA flter and a 24 lb. 2.5 inch deep carbon filter. A pre-filter captures larger particles.
A hose can be connected to the 12" exhaust flange to create a negative air pressure zone.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The Air Marshal delivers enough filtration power to change the air in a 800 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
The carring handle and 2 inch industrial casters make the AIr Marshal one man portable.
A pressure light indicator shows when the HEPA filter needs changing.
|
|
<
Technical Characteristics
Dimensions: 31 " x 18"
Shipping Weight: 104 lbs. with pallet
Operating Weight: 84 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, 99% electrostatic particle filter wrapped around a medical-grade HEPA filter
Carbon: 30 lbs.
Carbon w/canister: 34 lbs.
HEPA: Medical-grade HEPA
Electrostatic: Electrostatic wrap around the HEPA
CFM: 450
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz
Amps: 1.3 / .65
Cord length: 8 ft.
Decibel Level: 48 - 66 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
The Air Rhino HEPA Air Scrubber by Electrocorp Delivers up to 1,000 Cubic Feet (CFM) of clean air per minute.
The Air Rhino delivers enough filtration power to change the air in a 1,500 sq. ft. room with 8.5' ceiling 4.7 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
A hose can be attached to the 12" flange on the air outlet. This allows the creation of a negative air pressure zone to control the spread of dust.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The carrying handles and wheels allow moving the Air Rhino.
A pressure light indicator shows when the HEPA filter needs changing.
|
