Air Scrubber Applications
Art Studios and
Art Schools
Auto Body Shops
Chemical and Odor Control
Coarse Particle Control
Concrete Dust
Construction
Copiers and Printers
Dust Control
Extruding and Injection
Molding
Fiberglass Dust
Hospital
Laser Engraving
Mold
Office
Police Evidence Rooms
Print Shops
Offices
Salons
Brazilian Keratin
Treatments
Nail Salons
Welding
Tobacco Smoke
Models
ELECTROCORP
Air Marshal Series
Air Rhino Series
DIRTY DOG
Fume Extractors
I6500
Laser 6000
RAP Series
RSU Series
Print Safe 5000
9000 Ceiling Mount
|
Air Scrubbers for Print Shops
 |
|
Health hazards of that "print shop smell"
Long considered just "part of the job", pervasive chemical fumes associated with wide-format printing can have serious and irreversible health consequesnces.
Wen inhaled of absorbed through the skin, exposure can have immediate effects, or can have consequences years into the future.
Short term exposure may result in employees complaining of fatuqye, nausea, dizziness and skin rashes.
Repeated long-term exposure may cause damage to lungs, liver central nervous system and may cause cancer.
These serious air scrubbers aggressively clean print shop air of hazardous airborne particles, pathogens and gases.
Air scrubbers should be powerful enough to clean your air volume 6 times per hour. For example, a 20 by 30 foot room with a 12 foot ceiling has a volume of 7,200 cubic feet. In this example your air scrubber must deliver 720 cubic feet of clean air each minute to clean the air 6 times per hour.
Please call us at 800-868-0964. Our knowledgable experts can help!
| Air Scrubber |
Configuration |
Description |
| Allerair 5000 Print Safe |
27 Pound 3.5 inch deep Vocarb carbon filter. electrostatic particle filter. Pre-filter |
At Source Capture of particles and gases. |
| Electrocorp RAP-204-CC |
30 Pound carbon filter, 360° intake, Micro HEPA wrap filter .3 micron, pre-filter 10 micron. |
- Delivers up to 350CFM
- Covers up to 450 square feet |
| Electrocorp RAP-24-CC |
60 Pound carbon filter, 360° intake, Micro HEPA wrap filter .3 micron, pre-filter 10 micron. |
- Delivers up to 900CFM
- Covers up to 1,000 square feet |
| Electrocorp RSU-24-CC |
60 Pound carbon filter, 360° intake, Micro HEPA wrap filter .3 micron, pre-filter 10 micron. |
- Delivers up to 1,000 CFM
- Covers up to 1,000 square feet
- Negative pressure ready |
| Allerair I6500 A 160 |
160 Pound carbon filter, 2 inch HEPA filter, 2 inch pre-filter |
- Delivers up to 1,000 CFM
|
| Allerair Air Rhino Carbon |
100 Pound carbon filter |
- Delivers up to 1,300 CFM |
| Electrocorp RAP-48-CC |
120 Pound carbon filter, 360° intake, Micro HEPA wrap filter .3 micron, pre-filter 10 micron. |
- Delivers up to 1,800CFM
- Covers up to 2,000 square feet |
| Electrocorp RSU-48-CC |
120 Pound carbon filter, 360° intake, Micro HEPA wrap filter .3 micron, pre-filter 10 micron. |
- Delivers up to 1,800 CFM
- Covers up to 2,000 square feet
- Negative pressure ready |
|
|
|
For Inquiries or Quotes Call 800-868-0964 Our knowledgable experts can help!
| Air Scrubber |
Configuration |
Description |
|
Technical Characteristics
Dimensions: 20.5" x 15" (height x diameter) - Note inlet size is custom
Shipping Weight: 65 - 75lbs (up to 3 boxes)
Operating Weight: 78 lbs.
# of units per pallet: 1
Filtration System: Custom-built printer intake hood, deep bed activated carbon, micro-HEPA electrostatic wrap rated at 99% efficient at 0.1 microns, pre-filter
Carbon w/canister: 27 lbs. Carbon filter, 3.5" deep Vocarb blend
HEPA: n/a
CFM: 200 at the inlet
Speed: Variable
|
Voltage: 115/60Hz or 230/60Hz Please specify when ordering
Amps: 1.4 / .7
Cord length: 8 ft.
Decibel Level: 55 - 75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Moveable, on 2" industrial casters
Pressure Gauge /Light Indicator: No
Filter Access: Bottom screws
Colors:Sandstone and black
Motor Details: Blower wheel / motor
|
|
Electrocorp 5000 Print Safe
200 CFM at The Inlet
Inlet Size Customized to fit Your Printer or Copier
Designed for side-by-side use with printing and copying equipmentPlease specify the exhaust port dimensions of Your Printer or Copier
We will customize the inlet size to fit Your Printer or Copier
The 5000 Print Safe contains an electrostatic particle filter and a 27 lb. 3.50 inch deep carbon filter. A pre-filter captures larger particles.
The variable speed control allows you to fine tune motor speed and noise.
|
|
Dimensions: 29" x 12"
Shipping Weight: 70 lbs. with pallet
Operating Weight: 50 lbs.
# of units per pallet: 2
Filtration System: Carbonized 10 micron pre-filter, carbon filter wrapped with an electrostatic particle filter, material rated at 99% efficient at 0.1 microns
Carbon: 27 lbs.
Carbon w/canister: 30 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 350
Speed: Variable
|
Voltage: 115/60Hz or 230/60Hz Please specify when ordering
Amps: (115/220) .87 / .45
Cord length: 8 ft.
Decibel Level: 30-55 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Lightweight and portable, no wheels
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
The RAP 204 CC delivers up to 350 CFM (Cubic Feet per Minute).
The RAP 204 CC delivers enough filtration power to change the air in a 620 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Low noise 30 dB on Low 55 dB on high three feet from the machine. Quiet operation: Faint (normal private office noise) on low speed
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers. |
|
Dimensions: 37 " x 22"
Shipping Weight: 110 lbs. with pallet
Operating Weight: 75 lbs.
# of units per pallet: 1
Filtration System:Blue tacky 10 micron pre-filter, medical-grade HEPA filter wrapped with an electrostatic particle filter, material rated at 99% efficient at 0.1 microns
Carbon: N/A
Carbon w/canister: N/A
HEPA:Medical-grade HEPA
Electrostatic: Electrostatic wrap around the HEPA
CFM: 250 - 900
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: (115/220) 2 / 1
Cord length: 8 ft.
Decibel Level: 50-61 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" diameter wheels
Pressure Gauge /Light Indicator: Yes
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
The RAP 24 CC delivers up to 900 CFM (Cubic Feet per Minute).
The RAP 24 CC delivers enough filtration power to change the air in a 1,590 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Low noise 50 dB on Low 61 dB on high three feet from the machine.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers. |
|
Dimensions: 39.5 " x 20"
Shipping Weight: 167 lbs. with pallet
Operating Weight: 132 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, insert of 99% electrostatic and a 30 ppi foam gasket
Carbon: 51 lbs.
Carbon w/canister: 60 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 250 - 950
Speed: Variable
|
Voltage: 115/60Hz ONLY
Amps: 3.3
Cord length: 8 ft.
Decibel Level: 70 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 4 x 3" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
The RSU 24 CC delivers up to 950 CFM (Cubic Feet per Minute).
The RSU 24 CC delivers enough filtration power to change the air in a 1,675 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers. |
|
Technical Characteristics
Dimensions: 70" x 24.5" x 21" (H x W x D)
Shipping Weight: 340 lbs. with pallet
Operating Weight: 375 lbs.
# of units per pallet: 1
Filtration System: Two 80 lb. refillable carbon filters, particle and dust pre-filter
Carbon w/canister: 160 lbs.
HEPA: N/A
Electrostatic: N/A
CFM: 750 - 1000 Delivered
Speed: 2-speed
|
Voltage: 115/60Hz
Amps: 5.4
Cord length: 8 ft.
Decibel Level: 55-75 dB
Overload Protection: Yes
CSA/UL: Certified
Maneuverability: Designed as a stationary unit with lockable 3" wheels for easy placement and set up
Pressure Gauge /Light Indicator: Yes
Filter Access: Front with phillips screws
Options: 12" negative air flange, 20W UV bulb
Colors:Sandstone
Motor Details: Motor with a backward curved impeller wheel / motor
|
|
The I-6500 A 160 Air Scrubber by Electrocorp Delivers up to 1,000 Cubic Feet (CFM) of clean air per minute.
The I-6500 delivers enough filtration power to change the air in a 1,500 sq. ft. room with 8.5' ceiling 4.7 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
My be ordered with flanges for ducting to equipment or ventilation systems, negative or positive air applications.
Filter Change Gauge for visual indication of filter pressure.
20 Watt Ultra Violet available to kill Bacteria and Mold Spores |
|
Dimensions: 26 " x 26" x 37 " (H x W x D)
Shipping Weight: 285 lbs. with pallet
Operating Weight: 250 lbs.
# of units per pallet: 1
Filtration System: 100 lb. industrial carbon filter, 1" pre-filter, 1" dust filter
Carbon w/canister: 100 lbs.
HEPA:N/A
Electrostatic: N/A
CFM: 1000 Deliverd
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: (115/220) 8.9 / 4.5
Cord length: 8 ft.
Decibel Level: 55-75 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: Portable on industrial 3" wheels for easy placement and set up
Pressure Gauge /Light Indicator: Yes
Filter Access: Side latch
Options: Custom carbon blend, 12" inlet flange, 20W UV bulb
Colors:Galvanized steel
Motor Details: Centrifugal blower
|
|
The Air Rhino Carbon Air Scrubber by Electrocorp Delivers up to 1,000 Cubic Feet (CFM) of clean air per minute.
The Air Rhino delivers enough filtration power to change the air in a 1,500 sq. ft. room with 8.5' ceiling 4.7 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
A hose can be attached to the 12" flange on the air outlet. This allows the creation of a negative air pressure zone to control the spread of dust.
A 12" intake flange may be ordered with the Air Scrubber. This allows for the creation of a positive pressure zone or direct ducting to equipment.
The carrying handles and wheels allow moving the Air Rhino.
A pressure light indicator shows when the HEPA filter needs changing. |
|
Dimensions: 62 " x 22"
Shipping Weight: 235 lbs. with pallet
Operating Weight: 200 lbs.
# of units per pallet: 1
Filtration System: Carbonized 10 micron pre-filter, carbon filter wrapped with an electrostatic particle filter, material rated at 99% efficient at 0.1 microns
Carbon: 105 lbs.
Carbon w/canister: 120 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 500 - 1800
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: 3.6 / 1.8
Cord length: 8 ft.
Decibel Level: 50-64 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 5 x 2" diameter wheels
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
The RAP 48 CC delivers up to 1,800 CFM (Cubic Feet per Minute).
The RAP 48 CC delivers enough filtration power to change the air in a 3,175 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Low noise 50 dB on Low 64 dB on high three feet from the machine.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers. |
|
Dimensions: 71 " x 20"
Shipping Weight: 240 lbs. with pallet
Operating Weight: 200 lbs.
# of units per pallet: 1
Filtration System: Blue tacky 10 micron pre-filter, carbon filter, insert of 99% electrostatic and a 30 ppi foam gasket
Carbon: 105 lbs.
Carbon w/canister: 120 lbs.
HEPA: N/A
Electrostatic: Electrostatic particle filter, material rated at 99% efficient at 0.1 microns
CFM: 500 - 1800
Speed: Variable
|
Voltage: 115/60Hz or 230/50Hz Please specify when ordering
Amps: 4.8 / 2.4
Cord length: 8 ft.
Decibel Level: 70 dB
Overload Protection: Yes
CSA/UL: Motor & Electrical Components
Maneuverability: 4 x 3" wheels with frame
Pressure Gauge /Light Indicator: N/A
Filter Access: Top
Options: Custom carbon blend
Colors: As shown
Motor Details: Motorized impeller in a housing
|
|
The RSU 48 CC delivers up to 1,800 CFM (Cubic Feet per Minute).
The RSU 48 CC delivers enough filtration power to change the air in a 3,170 sq. ft. room with 8.5' ceiling 4 times per hour.
The variable speed control allows you to fine tune motor speed and noise.
Scrubbed air is ejected out the top of the unit to the ceiling to create a room-wide ceiling to floor laminar air flow pattern that is key to maintaining high quality indoor air.
Contaminated air is drawn in 360 deg around the circumference of the unit.
The RSU has a very small footprint and is easily moved on its 2" wheels.
Designed for 24 hour operation
Electrocorp air scrubbers have been tested and approved by the Department of Homeland Defense for use by the U.S. Army Corps of Engineers. |
|
|
|
|
